FormFutura EasyClean resin cleaner

EasyClean FormFutura Resin Cleaner

EasyClean resin cleaner is chemically engineered to safely and effectively remove any uncured photopolymer 3D printing resin in the range of 385 – 420nm from SLA, DLP, or LCD 3D printed objects. EasyClean is made from organic solvents and is safer and more effective than Isopropyl Alcohol (IPA) and can be used roughly 3 times longer than IPA.  

Key features:

• Superb cleaning properties
• Breaks down resin better than IPA and other solutions
• Doesn't leave any residue, cloudiness, or white haze
• No sticky prints
• Compatible with all UV curable resins for SLA, DLP, and LCD 3D printing technologies
• Compatible for cleaning with magnetic stirrers, ultrasonic cleaners, and washing/curing stations
• No transport restrictions
• Not classified as a dangerous good by ADR and IATA
• Non-flammable
• Limited odor
• Can also be used for cleaning build plates, vats, and other surfaces that come in contact with resins
• Long shelflife up to 24 months

How to use

    Put the resin print in a tub filled with EasyClean resin cleaner
    Clean for 10-15 minutes when cleaning by hand, or 5 minutes when using an ultrasonic cleaner
    After cleaning let the printed object dry or rinse with tap water
 
Storage

Store EasyClean in a well-ventilated area in its original HDPE bottle, or jerrycan. Make sure the bottle or jerrycan is tightly closed and stored at a temperature below 25°C. When stored properly EasyClean Resin Cleaner has a shelflife up to 24 months.
Physical properties
Description                            Test method        Value
Flashpoint                             ASTM D 3828        75°C (1013hPa)
Boiling point                                                    189,6°C (1013hPa)
Self-ignition temperature                                  207°C (1013 hPa)
Density at 23°C                     MVPF 18              0,9539 g/cm3 (20 °C)