Polymaker Polysher

SPECIFICATIONS

Technology                        Micro-Droplet Polishing
Compatible Material           PolySmoothTM
Polishing Liquid                 Isopropyl Alcohol, 70% or above [90% or higher recommended]
Polishing Time                  20 – 40 min typical [varies based on part size, alcohol concentration and ambient temp.]
Product Dimensions          230 x 300 x 360 mm
Shipping Box Dimensions  350 x 400 x 460 mm
Product Weight                 4 kg
Shipping Weight               6.8 kg
Maximum Part Size           Up to a 150 mm (diameter) x 180 mm (height) cylinder
Operating Temperature     15 – 32 °C
Storage Temperature        0 – 38 °C
Power Requirements         Power Supply: INPUT: AC 100-240V, 50/60Hz, 0.4A OUTPUT: 5V 2000 mA


ShenZhen Rongweixin Technology Co.Ltd
PolysherTM
INPUT: 5V 2000mA

Can the Polysher™ be used with other solvent than IPA?

No, the nebulizer is designed and calibrated to only work with IPA, moreover other solvents may damage the Polysher™.
The Polysher™ will not work with PLA.

How often do I need to change the nebulizer?

The nebulizer membrane may develop micro-cracks over time which may affect the mist production performance. We recommend changing the nebulizer when you notice a drop in your mist density or height. The nebulize can usually last ~100hours of polishing time. The Polysher™ comes with 2 nebulizers.
Additional nebulizers can be found here.

Does the Polysher™ uses a heat source to work?

No, for additional safety we have developed a technology using a nebulizer to create a mist of micro droplet which will evenly smooth your 3D printed part.

NOTE: We do not heat up the IPA and use the vapor to smooth the 3D print.