RAISE3D Buildtak Surface (E2, E2CF)

Product description:

The E2 and E2CF Printing Surface uses BuildTak as its printing surface. BuildTak is sturdy and durable, so it can more effectively protect the build plate. BuildTak is heat-resistant and strong, which can be reused many times, and is suitable for printing a variety of filaments. The E2 and E2CF Printing Surface will adhere firmly to the build plate, so it will not become dislodged or fall off during the printing process. It is also very easy to remove the model from the printing plate.

Included:

• 1×E2 and E2CF Printing Surface

Product specifications:

• Size: 370mm×255mm
• Packaging Size (WxDxH): 525×355 x 80mm
• Weight with Packaging: 462g

For Raise3D E2 and E2CF printers only, not included the E2 and E2CF Flexible Plate.

Safety warnings:

    Do not use solvents such as acetone for cleaning, so as not to damage the printing surface. You can wipe the printing surface with water or alcohol.
    When installing E2 and E2CF Printing Surface, wipe down your bare build platform making sure it is clean and free of debris. Remove the white adhesive liner and apply the BuildTak sheet to the bare build plate. Start from one edge of the build plate and work your way to the other edge, smoothing the BuildTak sheet with a card or a feeler gauge. Make sure that there are no air bubbles between the BuildTak sheet and the build plate after it is pasted.
    Make sure the build plate is level and calibrate the nozzle height to ensure printing accuracy.